Aug. 6, 2009, Stratford, Conn., – Sikorsky Aircraft Corp. has begun receiving the first of the 8,500 supplier parts that will constitute the new CH-53K heavy lift helicopter Sikorsky is developing for the U.S. Marine Corps. Arrival of the parts – primarily transmission gear forgings that Sikorsky machinists will intricately refine – indicates steady and solid progress toward production of the first prototypes. Sikorsky Aircraft is a subsidiary of United Technologies Corp.
“The arrival of the first forgings is a significant and visible milestone for the program,” said John Johnson, CH-53K Helicopter Program manager. “It means the program is advancing from the ‘paper’ stages of engineering and design to the hardware stages of castings and forgings. It is exciting to see such an impressive aircraft start coming to life with these forgings for the dynamics system.”
The parts will support assembly of the seven prototype vehicles that will be delivered during the system design and development program. Of the seven, four will serve as engineering development vehicles. The remaining three will serve as a dedicated ground test vehicle, a static test article, and a fatigue test platform. The prototypes will be assembled at Sikorsky’s Development Flight Center in West Palm Beach, Fla.
The CH-53K will replace the current three-engine Sikorsky CH-53E SUPER STALLION helicopter. The CH-53E helicopter is currently the largest, most powerful marinized helicopter in the world. It is deployed from Marine Corps amphibious assault ships and land bases to transport personnel and equipment, and to carry external (sling) cargo loads.
The CH-53K helicopter will nearly triple the payload to 27,000 pounds transportable over 110 nautical miles under “hot high” operational conditions. It will maintain the same footprint as the CH-53E and have significantly lower operational costs. The CH-53K helicopter’s maximum gross weight (MGW) will increase to 74,000 pounds, versus 69,750 pounds for the CH-53E aircraft, and it will be capable of carrying an external load of up to 88,000 pounds as compared to 73,500 pounds for the CH-53E helicopter.
This new build helicopter will incorporate a joint interoperable glass cockpit with fly-by-wire flight controls; fourth generation rotor blades with anhedral tips; a low-maintenance rotorhead; new GE38-1B engines; a 15 percent increase in cabin size; a cargo rail locking system; external cargo handling improvements; survivability enhancements; and reduced operational and support costs.
“The CH-53K helicopter is the only aircraft that meets the Marine Corps’ requirements for heavy lift. It will provide significant improvement in operational capability and significant reduction in cost of ownership. This aircraft also will operate in ‘hot high’ conditions, all of which translates to a critical tool for the Marine Corps,” Johnson said.
Sikorsky Aircraft received a $3 billion System Development and Demonstration contract on April 5, 2006 to develop a replacement for the U.S. Marine Corps CH-53E heavy lift helicopter. The program is expected to produce more than 200 new aircraft.
The CH-53K helicopter team has successfully conducted several risk reduction initiatives on two critical technologies – split torque main gearbox and main rotor blade – and has implemented many process and product improvement measures as a result. The program conducted a successful Preliminary Design Review in September 2008, and is tracking toward a Critical Design Review in 2010.
“We are pleased with the current performance of our team and partners,” said Mark Cherry, Vice President of Marine Corps Systems. “The receipt of these first parts is validation of our development process.”
Sikorsky Aircraft Corp., based in Stratford, Conn., is a world leader in helicopter design, manufacture and service. United Technologies Corp., based in Hartford, Conn., provides a broad range of high technology products and support services to the aerospace and building systems industries.
This press release contains forward-looking statements concerning potential production and sale of helicopters. Actual results may differ materially from those projected as a result of certain risks and uncertainties, including but not limited to changes in government procurement priorities and practices, budget plans or availability of funding or in the number of aircraft to be built; challenges in the design, development, production and support of advanced technologies; as well as other risks and uncertainties, including but not limited to those detailed from time to time in United Technologies Corporation’s Securities and Exchange Commission filings.
Prototype assembly looms as first parts arrive for CH-53K Heavy Lift Helicopter
Fuel shortage may ground helicopters and small planesA Canada-wide aviation fuel shortage may ground some small planes…
Sikorsky CH-53K completes critical flight envelope expansionThe Sikorsky CH-53K King Stallion completed an external lift of…
Sacramento Police Department to operate first law enforcement configured Bell 505 Jet Ranger XBell has announced the signed purchase agreement for the sale…
StandardAero announces plans for expansion at three U.S. facilitiesStandardAero Component Services has announced a significant investment and expansion…
DTI Basic Quality Assurance - Vancouver
March 27, 2018
DTI Basic Auditing Principles - Vancouver
March 28, 2018
MRO Americas 2018
April 10-12, 2018
DTI Basic Quality Assurance - Calgary
April 10, 2018