FAA Awards Airwolf AMOC to AD 2007-26-12 on Robinson Helicopter Rotor Blades
Jan. 23, 2008, Middlefield, OH - Airwolf Aerospace has been granted an Alternative Method of Compliance (AMOC) by the Federal Aviation Administration for Airworthiness Directive 2007-26-12
Jan. 23, 2008, Middlefield, OH – Airwolf Aerospace has been granted an Alternative Method of Compliance (AMOC) by the Federal Aviation Administration for Airworthiness Directive 2007-26-12. The AD was issued for delamination of Robinson R22 and R44 helicopters’ main rotor blades. Installation of Airwolf’s Rotor Blade Protective Tape system is found by the FAA to provide a permanent and acceptable level of safety.
The AMOC permits all R22 and R44 operators to use Airwolf’s Rotor Blade Protective Tape which , eliminates the need for preflight inspections and entries into the aircraft’s permanent maintenance record, which would otherwise be mandatory under the requirements of the AD. The AMOC also legally eliminates the restriction on the installation of “blade tapes (anti-erosion tapes)”, which was recently added by Robinson to its Maintenance Manuals.
Airwolf’s solution STC-SR02491CH is a one-time application, using a unique adhesive polymer tape to prevent permanently the leading-edge skin debonding, which occurs when the bond line is exposed due to excessive erosion of the blade’s painted finish
“As of today, our Protective Rotor Blade Solution is the only permanent product on the market that is AD 2007-26-12 compliant”, says Jonny Quest, Airwolf’s technical director. “Now operators don’t have to go through daily blade inspections and can rely on an inexpensive and one-time application solution to a problem, which affects more than 2290 helicopters in the US alone.”
Robinson operators, mechanics and maintenance departments can order the Airwolf RBPT factory-direct at www.airwolfaerospace.com or at 800-326-1534, 440-632-5136
Airwolf Aerospace is a division of Airwolf Filter Corp, the world's leading manufacturer of remote-mounted oil filter systems for aero engines. STC'd and certificated on all Lycoming, Continental, and Franklin ‘flat’ engines as well as radial engines by Pratt & Whitney, Warner, Jacobs, Wright and Continental, the systems are also original equipment on Aviat Husky, Pitts and American Champion as well as Maule aircraft.
Airwolf systems are endorsed and recommended by engine overhaul shops such as Covington, Air Repair, Penn Yan, Mattituck, G&N, Aero Engines, Aero Recip, Aircraft Cylinder &' Turbine, Sun Air Parts and Tulsa Aircraft Engines. Airwolf also manufactures the certified Walker air-oil separator for all piston engines, as well as AirSep brand air-oil separators and the world’s only line of wet vacuum pumps.