Problem: Low-light and nighttime aircraft operations are especially risky due the inability of the pilot to see many obstacles in the dark. Medical emergency (EMS) operations are risky not only due to their low-level operations and the requirement to land where the action. Many search and rescue operations have to be terminated at night due to low or no vision. Off shore oil operations, logging, power generation companies and many other types of flight operations simply cannot be limited by darkness as at times, lives are on the line and time is limited.
Solution: Low-light and nighttime civilian flight operations can now be carried out safely thanks to NIVISYS Industries' NVAG-6 night vision goggles recently approval by the FAA. The improved safety factor is obvious, especially in areas near power lines, towers, high-rise buildings, difficult terrain and other factors including other air traffic. Now, search-and-rescue and certain civil air operations can be safely and effectively extended into the night by using NIVISYS' night vision goggles in conjunction with proper lighting modifications to the aircraft.
History making: "We are very proud of these new goggles, especially since they were the first and only night vision aviation goggles to be approved by the FAA, which said they made 'night vision goggle history.'"-Larry Higman, NIVISYS Aviation Marketing Manager.
Equipment: Constructed of anodized aircraft quality-aluminum, they are lighter than mil-spec goggles making the NVAG-6 less susceptible to g-force stresses on the pilot's head. The helmet mount is designed to provide a very positive ergonomic feel so they may be operated easily by touch during flight.
Individually adjustable 25mm eye-relief eyepieces deliver a crystal-clear image even to operators wearing prescription glasses or contacts. Because the goggles are binocular, they help improve the pilot's depth of field which can be critical in landing and takeoffs, especially important in areas with nearby obstacles.
Power requirements: Two AA alkaline batteries (2.7-3.0 volt DC) will give 40+ hours of use. The standard battery pack holds two separate loads of AA batteries giving the user well over 80-hours of operational time.
Helmet mount (see photo image): The flip-up base allows for fine tuning, giving the user 25mm vertical and 27mm fore/aft adjustment with a minimum of 10-degree of tilt adjustment. Proper mounting allows for the user to go under goggles unaided for aircraft instrumentation reading. Additionally, when the helmet mount is flipped into the up position, the goggles automatically shut down to prevent tube damage should they be exposed to bright lights if the operator fails to turn the units off when exiting the aircraft.
Federal approval: NIVISYS Model NVAG-6 Night Vision Aviator Goggles are the first and only night vision goggles meeting the stringent FAA TSO-C164 (Federal Aviation Administration Technical Standard Order). Additionally, NIVISYS' NVAG-6 goggles are further tested to the harsh environmental requirementsof DO-160D.
Basic vision specifications: Focus range, 25cm to infinity; 1x magnification; +2 to -6 diopter adjustment; eye relief 14mm at 25mm distance, 40-degree field of view.
Aircraft light modifications: For domestic use NIVISYS' NAVG-6 goggles operate with a Class B filter in the objective lenses.
For additional information please contact:NIVISYS Industries, LLC at 480-970-3222 or
For media assistance only: Please contact Shults Media Relations, LLC at
Night vision goggles approved for civil aviation
Bruno Even appointed CEO of Airbus HelicoptersAirbus SE has appointed Bruno Even, 49, Chief Executive Officer…
Airbus completes first flight demonstration of commercial delivery droneAirbus Helicopters’ Skyways unmanned air vehicle has successfully completed its…
Bell delivers first 505 Jet Ranger X helicopters to JapanBell Helicopter has announced the delivery of two Bell 505…
Phillipines president orders cancellation of helicopter dealThe president of the Philippines has told his military commanders…
February 26-1, 2018
DTI Basic Auditing Principles - Winnipeg
March 14, 2018
DTI Basic Quality Assurance - Vancouver
March 27, 2018
DTI Basic Auditing Principles - Vancouver
March 28, 2018